How to Install Customized Wallpaper
Transform your space with customized wallpaper by following this step-by-step guide. From preparation to installation, ensure a seamless and professional finish.
Pre-Installation Checklist
Before you begin, prepare the wall and workspace to ensure a smooth installation process:
1. Wall Preparation:
○ Ensure the wall is smooth, clean, and dry.
○ Apply a coat of putty and follow it with an oil primer mixed with enamel paint for better adhesion.
2. Check for Wall Issues:
○ Ensure the wall is free from seepage, cracks, or deformities.
○ Address any imperfections to avoid peeling or misalignment.
3. Site Preparation:
○ Clear the installation site of dust, dirt, and obstacles.
○ Remove furniture from the wall area. Installers will not move furniture, so plan accordingly.
4. Equipment Setup:
○ Provide a sturdy ladder for standard installations.
○ For ceiling or double-height walls, scaffolding is recommended to ensure safety and precision.
Step-by-Step Installation Guide
1. Measure and Prepare the Wallpaper
Accurate measurements and preparation are essential for success:
● Measure the Wall: Use a measuring tape to determine the exact dimensions of your wall. This helps avoid alignment issues.
● Trim White Edges: Remove excess white areas on the sides of the wallpaper for a clean fit.
● Leave Extra Margin: Add a little extra length at the top and bottom for precise trimming during installation.
2. Apply Adhesive
Proper adhesive application ensures the wallpaper sticks securely:
● Even Application: Use a roller or brush to spread an even coat of adhesive on the wall.
● Extend Slightly: Apply adhesive slightly beyond the wallpaper's edges to ensure complete coverage.
3. Hang and Align Wallpaper
Bring your design to life with careful placement:
● Position the First Panel: Align the first strip of wallpaper precisely at the top edge of the wall.
● Smooth Out Air Bubbles: Use a smoothing tool to press the wallpaper onto the wall, working from the center outward.
● Seamless Blending: When hanging additional panels, overlap slightly and adjust for pattern matching.
4. Repeat for Additional Panels
Consistency is key to achieving a flawless result:
● Follow the Same Process: Apply adhesive, align, and smooth each panel.
● Match Patterns: Ensure designs align perfectly across all panels for a cohesive look.
5. Trim and Finish
Add the finishing touches for a polished appearance:
● Trim Excess Paper: Once the adhesive dries, use a taping knife as a guide and a sharp blade to trim any excess at the top and bottom.
● Cut Around Fixtures: Carefully cut around outlets and switches. Remove excess material and reattach covers for a neat finish.
Pro Tips for Wallpaper Installation
● Double-check all measurements and cuts before installing.
● Use fresh blades for clean, precise trimming.
● Allow adhesive to dry completely before final trimming.
How to Install Your Blinds
Our blinds are made from blackout fabric and are supplied ready to fit your window's exact dimensions.
1. Mark Bracket Positions
Decide whether you're mounting inside the window recess or on the wall/frame above it, then mark bracket positions evenly at each end (and the centre, for wider windows).
2. Fix the Brackets
Secure the brackets using the appropriate screws for your wall or frame material. Make sure they're level before tightening fully.
3. Attach the Blind
Click or slot the roller mechanism into the brackets as per the fitting supplied. Test that it rotates smoothly.
4. Test Operation
Raise and lower the blind a few times to confirm it moves freely and sits level across the full width of the window.
Not confident fitting it yourself, or working with an unusual window shape? Get in touch and we can advise or recommend a local installer.
How to Install Your Glass Film
Our glass film is applied using the standard wet-application method, which allows you to reposition it slightly while it's still wet before it sets.
1. Clean the Glass Thoroughly
Remove all dust, grease, and residue from the surface — any trapped debris will show through the film once applied.
2. Prepare a Soapy Water Spray
Mix a few drops of mild, unscented dish soap into a spray bottle of water. Spray the glass surface generously before applying the film — this lets you slide the film into position.
3. Apply the Film
Peel back the backing gradually as you position the film, spraying the adhesive side lightly with soapy water as you go to prevent premature sticking.
4. Squeegee Out Air and Water
Working from the centre outward, use a squeegee to press out air bubbles and excess water beneath the film.
5. Trim and Let Dry
Trim any excess film at the edges with a sharp blade, then leave it to dry fully (typically 24–48 hours) before cleaning the surface.
Questions about applying film to a curved, textured, or unusual glass surface? Contact us before you start.
Ready to give your space a makeover? Explore our wallpaper, blinds, and glass film collections.